|
| |
 |
 |
Winston 1000 |
| |
|
| Type: PSG/1-5M, PSG/1-5T, PSG/1-12M, PSG/1-12T |
| |
|
| Application: |
Water pumps. |
| |
|
| Operation: |
The switch controls the pump working automatically and makes it work between the minimum and maximum setting values: at the minimum setting value, the electric contacts close and start the motor; at the maximum value, they open and stop the motor. |
|
| |
|
 |
|
Winston 2000 |
| |
|
| Type: M/1-3.5M |
| |
|
| Features: |
Winston 2000 has been designed to automatize the start and the stop of electric pumps. In case of drop in pressure or stop of the flow in the system – opening and closing of the taps respectively – Winston 2000 handles the start and stop functions electronically. |
|
| |
|
|
Winston 3000 |
| |
|
| Rated Voltage: |
220V~240V 110V~115V |
| |
|
| Max. Current: |
10A |
| |
|
| Frequency: |
50~60HZ |
| |
|
| Max. Power: |
1.1KW |
| |
|
| Joint Screw: |
1” |
| |
|
| Protection Grade: |
IP 65 |
| |
|
| Starting pressure to choose: |
1.5 bar, 2.2bar |
|
|
| |
|
| Coverage: |
As a completely new device, it can guarantee the optimum control of electric pumps used in a plumping systems. Being an intelligent mix of hydraulic and electronic engineering, the control maintains bothe pressure and the flow and controls the operation of the pump automatically. It needs no pressure tank as in the traditional systems. There are no plenum chambers to recharge and no irritating variation in pressure and in flow at the point of use. No adjustment or maintenance is required. It is absolutely dependable, durable and simple to install. |
| |
|
| Functioning: |
The starting operation archived, the unit is programmed to perform all the pump control operations automatically. When particular operational break downs occur, such as water failure, obstruction of the suction pipe, etc, the unit recognizes the breakdown and red led failure lights up, at the same time a stop signal is sent to the pump to prevent damages caused by its working in the absence of water. Rectificationof failures that have caused the blockage, allows the system to be restarted by pressing the Reset button. |
|
^Top
|
|
