WILDEN - P4/KKAPP/WFS/WF/KTV
Model:
P4/KKAPP/WFS/WF/KTV
(01-02-008390-00)
Description:
When Jim Wilden first added a plastic pump series to his product portfolio, he designed it with what he knew best: a clamped pump. Incorporating the same benefits as a clamped metal pump, these plastic versions offer a simple, rugged design that is ideally suited for chemical applications. Engineered with ease of maintenance in mind, clamped plastic pumps are simple to install and are made for quick serviceability, allowing the pump to be taken apart and put back together with only a single tool. Proven by the test of time, hundreds of thousands of Jim Wilden's clamped plastic pumps have pumped billions of gallons of fluid on an annual basis.
DIN and ANSI flanged inlet/discharge liquid connections
Rotatable inlet and discharge for flexibility
Decades of proven performance
Clamped connections for faster maintenance
Low cost
Simple installation
Ease of operation and maintenance
Features:
AIR INLET
-1/2" FNPT
LIQUID INLET
-38 mm (1-1/2")
LIQUID DISCHARGE
-38 mm (1-1/2")
CONNECTION TYPE
-DIN/ANSI (Flanged)
MAX SUCTION LIFT CAPABILITY
-Rubber – 4.88 m (16') Dry, 7.92 m (26') Wet
-TPE – 3.96 m (13') Dry, 7.92 m (26') Wet
-Full-Stroke PTFE – 4.7 m (15.3') Dry, 9.3 m (30.6') Wet
-Reduced-Stroke PTFE – 3.05 m (10') Dry, 7.47 m (24.5') Wet
MAX FLOW RATE
-Rubber – 348 lpm (92 gpm)
-TPE – 354 lpm (94 gpm)
-Full-Stroke PTFE – 352 lpm (92.9 gpm)
-Reduced-Stroke PTFE – 261 lpm (69 gpm)
MAX PRESSURE
-8.6 bar (125 psi)
MAX DIAMETER SOLIDS
-4.8 mm (3/16'')
DISPLACEMENT PER STROKE *
-Rubber – 1.19 L (0.314 gal)
-TPE – 1.18 L (0.311 gal)
-Full-Stroke PTFE – 1.0 L (0.27 gal)
-Reduced-Stroke PTFE – 0.53 L (0.139 gal)
* 1 cycle = 2 strokes
